Create a room schedule
Give every room a simple code and label its windows separately. Record the room function, opening count, approximate width and height, opening sections and existing coverings. Add the floor for similar bedrooms so they are not confused. This is an information map, not ordering dimensions. Leave unknown figures open for a survey. A single total window count does not describe the differences across a larger house.
Connect consistency with room differences
A shared colour direction, metal finish or simple upper line can connect the interiors. Bedroom layers do not have to repeat the dining area. Mark rooms that can be seen from one another and discuss transitions between them, while preserving practical priorities in separate spaces. Present reference photographs as style directions rather than one ready-made solution for every room. Explain consistency through specific shared features and keep acceptable differences explicit.
Record orientation and evening privacy
Note the direction a window faces, when daylight becomes inconvenient and what lies opposite. Orientation alone is not a complete fabric recommendation. Describe evening privacy with indoor lighting separately from the daytime appearance. Reducing light for sleep is another requirement. Dense-looking fabric does not establish blackout; expectations need checking against the particular fabric, layers and system rather than borrowing a promise from a similar interior photograph.
Compare a hypothetical house plan
Imagine a house with one living room, two bedrooms and a kitchen. For discussion, one living room opening is 240 cm wide and a bedroom opening is 140 cm wide. These figures are illustrative, not ordering measurements. A common beige direction can remain while layers and controls differ. Describing each opening separately supports consistency by connecting the overall appearance with different uses. The example establishes neither fabric quantities nor finished dimensions.
Discuss weight, access and care early
For tall or wide windows, ask about the weight of the selected components and access for servicing as well as visual impact. Identify fabric, lining and accessories separately. Fixing suitability needs site assessment; this guide gives no load limit or installation method. Clarify which parts are removed for care and how any necessary service is agreed. Keep product-specific instructions rather than prescribe one cleaning routine for the whole house.
Count motorisation by its purpose
Window numbers, moving panels and motor numbers are not the same count. Record which layer should be motorised and which parts should move together or independently. Do not derive motor quantity from opening numbers alone; confirm it after system selection. If the existing power preparation is unknown, say so. Leave electrical arrangements for appropriate assessment rather than devising them yourself, and explain the desired controls for each room separately.
Link phases to room specifications
If work will be phased, identify the rooms needed first. Connect colour samples, finished dimensions, layers, system, controls and care notes to the same room code. Do not assume future availability of an identical material has been promised; confirm selection changes separately. The next step is discussion using the plan and prepared photographs, followed by a room-specific proposal. This guide presents no completed villa or geographical service commitment.